PLYWOOD DECKING REQUIREMENTS FOR MAGNETA
TRAILERS
WE SUGGEST USING 5/8" THICK OR
3/4" THICK GREENTREADED / MARINE GRADE / OR / WOOLMANIZED PLYWOOD. ALL THE FASTENERS
FOR ATTACHING THE PLYWOOD ARE INCLUDED
THE FASTENERS INCLUDED ARE CALLED A TECH. SCREW . THE ARE A SELF DRILLING
AND SELF TAPPING SCREW THAT WILL DRILL ITS OWN HOLE THOUGH BOTH THE PLYWOOD AND THE
TRAILERS CROSS MEMBERS, [ NOT NEED TO DRILL PILOT HOLES ] THEY WILL THEN ALSO TAP
THEIR OWN THREADS IN THE THE STEEL CROSS MEMBERS. THEY HAVE A COUNTERSUNK HEAD SO
THEY WILL THE THE PLYWOOD SURFACE SMOOTH WITH NO OBSTRUCTIONS. A DRILL WITH A
PHILIPS SCREW DRIVER BIT ATTACHMENT IS NEEDED TO APPLY THE TECH,. SCREWS.
M.P.T. MODEL PLYWOOD REQUIREMENTS
MODEL #UU1 REQUIRES 1 SECTION OF PLYWOOD CUT TO 48" LONG X 43" WIDE
.
MODEL #UUT2 REQUIRES 1 SECTION OF PLYWOOD CUT TO 48" LONG X 43"
WIDE.
MODEL #UUT3 REQUIRES 1 SECTION OF PLYWOOD CUT TO 96" LONG X43"
WIDE.
MODEL #UUT4 REQUIRES 1 SECTION OF PLYWOOD CUT TO 96" LONG X 43"
WIDE.
U.T.B MODEL PLYWOOD REQUIREMENTS
MODEL #UTB1 REQUIRES 1 FULL SHEET OF PLYWOOD 96"XLONG X48" WIDE
NO CUTTING REQUIRED.
MODEL #UTB2 REQUIRES 1 FULL SHEET OF PLYWOOD 96" LONG
X 48" WIDE NO CUTTING REQUIRED.
MODEL #UGC1 REQUIRES 1 FULL SHEET OF PLYWOOD
96" LONG X48" WIDE
NO CUTTING REQUIRED.
MODEL #UTB1LP REQUIRES 1
FULL SHEET OF PLYWOOD 96" LONG X48" WIDE NO CUTTING REQUIRED.
L.T.B MODEL PLYWOOD REQUIREMENTS
MODEL #LTB1 REQUIRES 1 FULL SHEET OF PLYWOOD 96" LONG X 48" WIDE
/ PLUS 1 MORE SECTION OF PLYWOOD CUT TO 96" LONG X 24" WIDE.
MODEL
#LTB1LP REQUIRES 1 FULL SHEET OF PLYWOOD 96" LONG X 48" WIDE / PLUS 1 MORE
SECTION OF PLYWOOD CUT TO 96" LONG X 24" WIDE.
MODEL #LTB2 REQUIRES
2 FULL SHEETS OF 96" LONG X 48" WIDE PLYWOOD NO CUTTING REQUIRED
MODEL
#LTB2XL REQUIRES 2 FULL SHEETS OF PLYWOOD 96" LONG X 48" WIDE / PLUS 1
MORE SECTION OF PLYWOOD CUT TO 96" LONG X 24" WIDE.
e-mail
oldinc@rconnect.com
