OLDY'S FRONT FENDER MOUNTING FLUSH & OFFSET MOUNTING TABS

Flush or Offset mounting tabs for front fenders.

Mounting Tabs any size $19.00 per pair.

From Flush zero offset, to 1 inch offset tabs.
#MT-0 tabs have a slight offset, but when mounted inside the flange of the fender sidewall it comes out even with the fender side surface.
#MT.25 tabs will give a 1/4" offset per side giving a total offset of a 1/2 total. example - these would allow a 6" wide fender to mount to 6 1/2" wide fork sliders.
#MT.5 tabs will give a 1/2" offset per side giving a total offset of 1". example - these would allow a 5 1/2"
wide fender to mount to 6 1/2" wide fork sliders.
#MT-1 tabs will give a 1" offset per side giving a total offset of 2", example - these would allow a 4 1/2"
wide fender to mount to 6 1/2" fork sliders.

above photos show fender tabs mounted by bonding them with fiberglass from the inside the fender flange.

NOTICE!
FENDER TABS ARE MADE FROM FIBER-GLASS WITH BIAXLE LAMINATE TO MAKE THEM VERY RIGID, THESE FENDER TABS CAN BE BOLTED OR RIVETED TO THE INSIDE FLANGE OF THE FRONT FENDER. FOR BEST APPEARANCE WE SUGGEST YOU PURCHASE AND SMALL FIBERGLASS REPAIR KIT AND SIMPLY FIBER-GLASS THE TABS TO THE INSIDE OF THE FENDER FLANGE TO KEEP THAT COOL CLEAN SMOOTH LOOK FOR YOU FRONT FENDER.

HOME REQUEST INFO PLACE ORDER CONTACT US ABOUT US CUSTOMERS BIKES

OLDY'S CUSTOM COMPOSITES - 821 GREENWAY STREET - HULL, IOWA - U.S.A. 51239 -1-712-439-2787