Oldys fenders, Oldys fiberglass, Oldys saddle bags, hard bags, harley bags, Harley bagger, bagger bags, filler fender.

occ

HARLEY EXTENDED SADDLE BAGS, SADDLE BAGS EXTENDERS, PLUS MATCHING HARLEY EXTENDED REAR FENDER OVERLAYS & FACTORY FENDER EXTENSIONS

#HD4EXTSB6
HARLEY TOURING 4" EXTENDED SADDLE BAGS 6" WIDE



4" EXTENDED HARLEY TOURING BAGS, FITS HARLEY TORUING MODELS 93 ON UP.
DUAL REAR CUT OUTS MOLDED IN FOR PIPES TO STICK THRU.
single side cut out also available $39.00 extra
EXCEPTS STOCK HARLEY LIDS , HARDWARE AND MOUNTING BRACKETS.


FIBERGLASS CONSTRUCTION, WHITE GELCOAT FINISH
RAW FIBERGLASS INSIDE PAINTED BLACK - CAN BE LINED WITH TRUNK LINER SPRAY, OR CUSTOM CARPET LINER
due to the deep depth of these bags they are molded in 2 halves and seamed together, the seam is finished out and sealed & primed over.

#HD4EXTSB6 - BAG PRICE $495.00 PER PAIR
Matching lids also available $130.00 per pair

SAME BAGS AS ABOVE IN 8" WIDE WITH NEW 8" WIDE LIDS, USES HARLEY LATCHES / HINGES
#HD4EXTSB8 - BAG PRICE PER PAIR WITH LIDS $795.00
See optional light recesses
CLICK HERE FOR SADDLE BAG EXTENSIONS

HARLEY TOURING 4 INCH EXTENDED FILLER FENDER OVERLAYS

4" EXTENDED HARLEY FILLER FENDER OVERLAY - FITS OVER FACTORY FENDER
- FITS 1993 TO 2008 or 2009 TO CURRENT, specify when ordering.
* FILLS THE GAP BETWEEN THE FACTORY FENDER AND THE BAGS.
* MATCHES THE ABOVE EXTENDED SADDLE BAGS, OR WORKS WITH THE HARLEY BAG EXTENDERS
CLICK HERE TO SEE THE HARLEY FACTORY BAG EXTENDERS
* FENDER CAN MOUNT OVER THE FACTORY FENDER OR WITHOUT THE FACTORY FENDER.
Modifications to fender may be required when mounting either way.

#HDTBF4EXTRT- FENDER PRICE $159.00
#HDTBF4EXTRT-LR - FENDER PRICE WITH LICENSE RECESS $188.00
#HDTBF4EXTRT-LR -RWD - FENDER PRICE WITH RWD COMBO LIGHT & LICENSE RECESS $188.00

*NOTICE -FACTORY FENDER MODIFICATION MAY BE REQUIRED IF LICENSEE OR LIGHT RECESS IS USED
See optional FRENCHED in light recesses

RWD LIGHT FIXTURE & CHROME FRAME - INCLUDES CHROME LICENSE FRAME AND DUAL FUNCTION CATS EYE TAIL LIGHT AND PLUG THAT CAN BE WIRED TO FIT HALRY WIRE HARNESS COST ---$299.00



CLICK HERE TO WATCH VIDEO ABOUT HOW TO INSTALL PIPE CUT OUTS INTO FENDER OVERLAY

#FBKIT1 QUART ------$39.00
kit includes 1 quart of resin, tube of catalist, and 12 feet long X 6 inch tall roll of fiberglass mat material

#FBKIT1/2 HALF QUART ------$29.00
kit includes 1/2 quart of resin, tube of catalist, 6 feet long X 6 in tall roll of fiberglass mat material

HD TOURING FENDER 4" EXTENSIONS WITH FILLER PANEL

#HDTFEXTENDER4A 4" TOURING FENDER EXTENSION - FITS 93 TO 07 HD TOURING MODELS $79.00


ADDS LENGHT TO FACTORY FENDER, ALSO FILLS THE GAP BETWEEN FENDER AND SADDLES BAGS, NOTCHES MAY HAVE TO BE MADE TO ALLOW CERTIAN STYLE PIPES TO PASS THROUGH. DRILLING ON THE SIDE OF FACTORY FENDER REQUIRED
,

IF YOUR BKE HAS THE FACTORY BUMPERETTE LIKE THE ROAD KINGS AND E-GLIDES IT WILL HAVE TO BE REMOVED TO USE THIS EXTENDER.

HOME REQUEST INFO PLACE ORDER CONTACT US ABOUT US
CUSTOMERS BIKES
FENDER MOUNTING ACCESSORIES

OLDY'S CUSTOM COMPOSITES - 811 BLACK FORREST ROAD - P.O. BOX 630 - HULL, IOWA - U.S.A. 51239
phone 1-712-439-3301 fax 1-712-439-1249 e-mail golden@rconnect.com